Achtung! Bitte verwenden Sie die Firmware-Datei nur in Verbindung mit der CCU2 ab Version 2.29.18. Nach dem erfolgreichen Übertragen des Updates ist es erforderlich den HmIP-PSM einmal von der CCU2 ab- und wieder anzulernen, damit alle neuen Funktionen in der CCU2 korrekt angezeigt werden. Please note: Only use the firmware file in connection with the CCU2 from version 2.29.18. After the update has been successfully transferred, it is necessary to disconnect the HmIP-PSM from the CCU2 and teach-in the device again. So that all new functions are displayed in the CCU2. Changelog: Version 1 (2 for pluggable).6.2 - 20170427 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B * 1454104F * 1764508B ** Bugfix * [HMIP_BSM-33] Fixed a bug with not acting device if the channel key was pressed at an included device. ** Comments * Version 1 (2 for pluggable).6.1 - 20170426 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B * 1454104F * 1764508B ** Bugfix * [HOTFIX] Increased the power to trigger a simulated keypress from 0.1W to 1 W. [HMIP_BSM-32] * [HOTFIX] Value for the new powerstatus is saved after being stable for two measurements. [HMIP_BSM-32] * Corrected default duration of weekprogramm to 0xFF. * Corrected / Optimised sending of a normal ACK/NACK. [CHANGEMANAGEMENT-25] ** Comments * Version 1 (2 for pluggable).6.0 - 20170425 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B * 1454104F * 1764508B ** Bugfix * Increased the pulse for switching the relais from 30 ms to 75 ms. ** Comments * Increased version due to creation of a tag. * Added lock feature to weekprogramm channel. * Added delayed weekprogram status info to status info receiver after change of lock channels. * Removed ramp time from the weekprogram. * Added sending of statusframes for the weekprogram. (After inclusion, cyclic and on request) * Corrected a bug with inhibit channels. [CHANGEMANAGEMENT-51] Version 1 (2 for pluggable).5.9 - 20170405 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B * 1454104F * 1764508B ** Bugfix * ** Comments * Added new weekprogramm. Version 1 (2 for pluggable).5.8 - 20170328 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B * 1454104F * 1764508B ** Bugfix * In auto inclusion mode, the triple burst listener device is not a permanent listener. ** Comments * Version 1 (2 for pluggable).5.7 - 20170308 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B * 1454104F * 1764508B ** Bugfix * Fixed a bug with the sequence counter in the unicast frame (for collecting ACKs) after sending multicast frames due to a long keypress. ** Comments * Version 1 (2 for pluggable).5.0 - 20161209 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B * 1454104F * 1764508B ** Bugfix * ** Comments * Increased version number due to creation of a tag. Version 1 (2 for pluggable).3.8 - 20161128 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B * 1454104F ** Bugfix * [GRASS] Corrected a bug with RSSI calculation in statusInfo. ** Comments * Version 1 (2 for pluggable).3.7 - 20161114 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B * 1454104F ** Bugfix * [GRASS] Fixed a bug that caused errors with one partner linked to more channels. ** Comments * Version 1 (2 for pluggable).3.6 - 20161104 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B * 1454104F ** Bugfix * Fixed a bug with sending unrequested ACKs. ** Comments * Version 1 (2 for pluggable).3.5 - 20161021 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B * 1454104F ** Bugfix * ** Comments * Added switching the relay as EMC action. Version 1 (2 for pluggable).3.4 - 20160926 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B * 1454104F ** Bugfix * Fixed a bug with the simulated keypress generated from the powermeter task. ** Comments * Version 1 (2 for pluggable).3.3 - 20160913 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B * 1454104F ** Bugfix * Added IDLE state to switch task. * Corrected behaviour of the powerfailure function. * Corrected behaviour of the overhead function. * Suppressed sending of StatusInfoFrames if the device is not included. * Corrected behaviour of factory reset if the keyVisual is pressed during powerUp. ** Comments * Version 1 (2 for pluggable).3.2 - 20160901 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B * 1454104F ** Bugfix * Included hmos 1.16.2 which fixed a bug with exlusion after inclusion ** Comments * Version 1 (2 for pluggable).3.1 - 20160721 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B * 1454104F ** Bugfix * Corrected size of action type. * Fixed a bug that caused not spawning conditional switch channel task. * Fixed setting of the decision value for falling direction in the conditional switch channel. ** Comments * Version 1 (2 for pluggable).3.0 - 20160719 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B * 1454104F ** Bugfix * ** Comments * Increased version number due to creation of a tag. Version 1 (2 for pluggable).1.17 - 20160718 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B * 1454104F ** Bugfix * StutusInfo frames from the switch module can now be send with ARR-Bit. StatusInfo frames from the powermeter are still unidirectional all the time. ** Comments * Version 1 (2 for pluggable).1.16 - 20160714 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B * 1454104F ** Bugfix * ** Comments * Removed sending of config update requests on buttonpress of the keyvisual for all permanent powered actuators. Version 1 (2 for pluggable).1.15 - 20160708 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B * 1454104F ** Bugfix * [HmIP-PSM]Fixed bug that first reset step is ready before the timeout of 4 seconds occur. * Suppress boot blinking if reset is in progress. * Fixed a bug with index of parameter arrays if the key visual is used as channel key. ** Comments * Version 1 (2 for pluggable).1.14 - 20160704 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B * 1454104F ** Bugfix * Conditional switch channel gets now removed in idle state. ** Comments * Set the default values for event delay of output1, meter and conditional channel from 1 to 3 seconds. * Powermeter arrays for averaging now always get resetted if SWITCH_set_level_real() is called. Version 1 (2 for pluggable).1.13 - 20160616 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B * 1454104F ** Bugfix * [HmIP-PSM]Fixed a bug in evaluation of long keypresses for the pairing mode. * [HmIP-PSM] Fixed a bug with setting parameters for the input channel. ** Comments * [HmIP-PSM] Set default value for the longpress time in the HmIP-PSx devices to 4s. Version 1 (2 for pluggable).1.12 - 20160613 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B * 1454104F ** Bugfix * Corrected some typos. ** Comments * Added conditional switch channel. Version 1 (2 for pluggable).1.11 - 20160531 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B * 1454104F ** Bugfix * Reset ACCEPT_ANY_DEVICE to 0. ** Comments * [HmIP-PSM] Major version increased to 2. Minor and Path number will run parallel for all devices. Version 1.1.10 - 20160518 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B * 1454104F ** Bugfix * ** Comments * [HmIP-PS] Added routines for HmIP-PS. * Renamed CS5490_zc.c /.h to zerocrossing_interrupt.c / .h to be more general. * Smaller changes to the DUMMY_SGTIN. * Reduced number of partners for HmIP-PSx to 20. With this all switch actuators act the same. Version 1.1.9 - 20160512 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B * 1454104F ** Bugfix * [HmIP-FSM16] Corrected a bug with the switching direction. ** Comments * Added visualisation of the channelstate with the key visual (Including the parameter) to all actuators. Version 1.1.8 - 20160510 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B * 1454104F ** Bugfix * ** Comments * [HmIP-PSM] Added pairing functionality. Version 1.1.7 - 20160509 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B * 1454104F ** Bugfix * ** Comments * [HmIP-PSM] Added routing functionality. Version 1.1.6 - 20160509 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B * 1454104F ** Bugfix * Some style changes. * Corrected calculation of energycount. ** Comments * Some optimisations on startup. Version 1.1.5 - 20160503 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B * 1454104F ** Bugfix * ** Comments * Corrected some comments and function headers. * Corrected parameter for energy threshold. It was one byte but has to be two byte. * [HmIP-PSM] Added parameter LED_DISABLE in list1 of the real channel. Version 1.1.4 - 20160502 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B * 1454104F ** Bugfix * ** Comments * [HmIP-PSM] Added default link between key visual and the switch channel. * [HmIP-PSM] Added routines to do visialisation of the channel state with the key visual. * [HmIP-PSM] Corrected factory reset gesture (only valid at power up). Version 1.1.3 - 20160428 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B * 1454104F ** Bugfix * ** Comments * [HmIP-PSM] Added key routines for switching with the key visual. Version 1.1.2 - 20160426 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B ** Bugfix * Fixed to which multicast addresses the device listens. ** Comments * Startet porting code to the PSM hardware. Version 1.1.1 - 20160425 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B ** Bugfix * Fixed a bug with ACKs to config update request frames. ** Comments * Version 1.1.0 - 20160413 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B ** Bugfix * ** Comments * Increased version number due to creation of a tag. Version 0.5.25 - 20160407 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B ** Bugfix * Fixed another bug with loading and accepting new parameter. ** Comments * Version 0.5.24 - 20160407 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B ** Bugfix * Fixed a bug with eventdelay of the switch channels. (wrong channel "group" was read) * Fixed a bug with reading out configuration parameters for the switch channel(s). ** Comments * Version 0.5.23 - 20160405 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B ** Bugfix * Added forgotten initialisation of of reset pin for FSM16. ** Comments * Added / Corrected Power fail detection for bistable relais. Version 0.5.22 - 20160401 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B ** Bugfix * Redesign of sending ACKs. * Added marker for rx options. ** Comments * Version 0.5.21 - 20160331 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B ** Bugfix * Fixed a bug with keypress counter in simulated keypresses. * fixed problem that the internal ACK frame is send to the address of the link partner, which has received while waiting for tx callback. * fixed problem hat the rx is not restarted while waiting for tx callback * Fixed a bug with sequence counter handling for statusinfo. ** Comments * Exchanged KEY_1 and KEY_2 to uniform channel layout of HmIP priducts. Now Channel 2 is the upper button but upper butten holds its old function. Version 0.5.20 - 20160330 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B ** Bugfix * Fixed a bug with checking the sender address (Mistake in version 0.5.17 checked not on receiving switch commands but in direct execution case) ** Comments * Version 0.5.19 - 20160329 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B ** Bugfix * ** Comments * Added answering of time information frames. Version 0.5.18 - 20160329 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B ** Bugfix * ** Comments * Changed behaviour of longkeypress in the internal link from toggle to the same behaviour as the short one. Version 0.5.17 - 20160324 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B ** Bugfix * Fixed handling of seq-counter of different sender. * Fixed executing of internal send commands. ** Comments * Corrected some typos, comments and style. * Removed unnecessary saving of sequence counter. * Reverted change of powerUp-jumptarget enumeration. Version 0.5.16 - 20160322 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B ** Bugfix * Fixed setting and sending of binary state from the real channel. * Fixed powerup behaviour. NOTE: PowerUp action is triggert 2s after boot due to settle time of the measurement IC! * Fixed some typos and style. ** Comments * Version 0.5.15 - 20160304 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B ** Bugfix * Fixed a bug with receiving new configuration for the powermeter channel. ** Comments * Version 0.5.14 - 20160303 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B ** Bugfix * Fixed a bug with numbering of parameters for powermeter channel. ** Comments * Version 0.5.13 - 20160301 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B ** Bugfix * Smaller cleanup and correction of typos. ** Comments * Added channel information to the statusinfo frame. * Actualisations of information in the LevelInfo frame Version 0.5.12 - 20160224 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B ** Bugfix * Fixed two small logic bugs in application.c. * Fixed a bug with sending long keypresses. ** Comments * Added support for bistable relays. Version 0.5.11 - 20160218 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B ** Bugfix * Corrected a bug with long keypress. ** Comments * Corrected number of possible partners for the powermeter channel. * Removed the small delay that was inserted in version 0.5.10. Version 0.5.10 - 20160210 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305B * 1554267B ** Bugfix * ** Comments * Added a small delay between receiving a "force statusinfo" telegramm trom testrunner and sending it because testrunner has a bug and/or is to slow to send the command and start the receive step. Version 0.5.9 - 20160205 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305A * 1554267B ** Bugfix * ** Comments * Added "force statusinfo" to the testmode. * Added saving of calibration gain values. Version 0.5.8 - 20160203 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305A * 1554267B ** Bugfix * Corrected teh handling of channel numbers with direct executions. * Corrected some size conflicts NUMBER_OF_ACT_CHANNELS and NUMBER_OF_SWITCH_CHANNELS in combination with virtual channels. * Fixed a bug in the order of calibration steps. ** Comments * Version 0.5.7 - 20151218 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305A * 1554267B ** Bugfix * ** Comments * Moved handling of Request Time Service frame from testmode to application receive callback. * Added handling of timeinfo request frames. Version 0.5.6 - 20151217 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305A * 1554267B ** Bugfix * Added MAX_PARTNERS_CHANNEL_POWERMETER to the maximal number of partner. * Fixed some minor bugs in getter functions for the device flags of LIST0 ** Comments * Implemented requesting and receiving time information. * Implemented sending of own time information. * Implemented handling of new LIST0 parameters. * Implemented handling of new LIST12 parameters. Version 0.5.5 - 20151210 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305A * 1554267B ** Bugfix * ** Comments * Added files an functions for the weekprogramm (first time compiling, not ready implemented). Version 0.5.4 - 20151127 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305A * 1554267B ** Bugfix * ** Comments * Implemented virtual Channels also to PowerUpAction. Version 0.5.3 - 20151126 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305A * 1554267B ** Bugfix * Corrected size of persist data in the linker options. * Corrected some comments. ** Comments * Implemented virtual channels. Version 0.5.2 - 20151120 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305A * 1554267B ** Bugfix * ** Comments * Corrected handling of sequence counter. Version 0.5.1 - 20151113 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305A * 1554267B ** Bugfix * ** Comments * Corrected some default values for the parameter. Version 0.5.0 - 20151111 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305A * 1554267B ** Bugfix * ** Comments * Increased the version number due to creation of a tag. * Added sending of NAK_INVALID_CHANNEL. Version 0.3.14 - 20151109 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305A * 1554267B ** Bugfix * Fixed a small bug in the powerUp action. * Corrected type of second parameter ("permanent") of PROFILE_timercalc-function (uint8_t -> bool_t). ** Comments * Resorted the order of writing the CS5490 registers on calibration. Version 0.3.13 - 20151105 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305A * 1554267B ** Bugfix * Added m_useTmp to the switch module to be able to do correct configuration. * Corrected a bug in the factory reset routines regarding the key number. ** Comments * Added parameter CURRENTDETECTION_BEHAVIOR. * Added case SERVICE_ID_FORCE_STATUSTEL in preparation for the calibration by the testtool. * Added calibration routines. * Removed obsolete application_dummy files. * Removed some obsolete pin definitions because these were unified across BSM and FSM. Version 0.3.12 - 20151028 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305A ** Bugfix * ** Comments * Added routines to save and read out the release delay time. Version 0.3.11 - 20151028 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305A ** Bugfix * ** Comments * Added routines for measuring the delay times of the relay. * Added routines to save and read out the operate delay time. Version 0.3.10 - 20151023 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305A ** Bugfix * ** Comments * Added testroutines for LEDs and KEYs. Version 0.3.9 - 20151023 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305A ** Bugfix * Fixed a bug with sending error frames. * Removed division by two at the calculation of the switching times because the worst possible switch time of the relais is longer as half a period and would cause negative switching times. ** Comments * Removed unnecessary parameter for zc-delay. * Removed some warnings. * Small change with sending NACKs. * Added a trigger for sending an ACK after direct executon frame with FRAMES_SNC_ACTION_CODE_RAMP_START was received. * Instead of three groups of one-dimensional arrays for power-up action now one groups of two-dimensional arrays is used. Version 0.3.8 - 20151019 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305A ** Bugfix * Fixed a bug in the key routines regarding inclusion requests and simultan switch commands. * Corrected location of GDO2 (transceiver IO) in the hardware config. ** Comments * Added Task for internal temperatur measurement. * Added sending of error frames. * Moved or deleted some functions from application_dummy.c * Corrected default relay delays for better accuracy. * Did some code clean-up and corrections of comments. Version 0.3.7 - 20151009 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305A ** Bugfix * Added initial configuration of the relay pin in the switch module. ** Comments * Added zero-crossing-switching (functionality without HMOS -> directly with the emlib). * Changed the return values of APPLICATION_KEY_key_evaluation to a bitarray to be able to handle a switch command of a not included device and sending out inclusion requests. Version 0.3.6 - 20150930 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305A ** Bugfix * Small change if the reset procedure gets aborted with a short keypress. ** Comments * Implemented report link partner problem. Version 0.3.5 - 20150929 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305A ** Bugfix * Switched read out of FUP and DRDY flags to be able to read the frequency with faster data interval. * Corrected ome wrong coments. ** Comments * Changed the reset procedure to fit for mains powered devices. -> added Error state and removed state for inital keypress. Version 0.3.4 - 20150928 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305A ** Bugfix * ** Comments * Added sending of StatusInfo frames after entering a new profile section. * Now the powermeter and the switch module can cancel a pending statusinfo from the other module if the own (delay) timeout is reached. Version 0.3.3 - 20150924 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305A ** Bugfix * Added sending of a StatusInfo telegramm after inclusion. ** Comments * Added sending of StatusInfo frames in the powermeter task. * Added sending of Powermeter-values in the statusinfo. * Added LevelInfo as ACK (Just a dummy, channel is still wrong). * Did some optimisations with sending frames in the application module. * Commented sending of ACKs in the switch module (this seems to be done in the profile module already). * Commented sending of StatusInfos in the switch module (this seems to be done in the profile module already). Version 0.3.2 - 20150915 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305A ** Bugfix * Changed sample number from 500 to 400. * Corrected the device type. ** Comments * Now the value of m_pavg (the last measured power value) is taken to sense the network status. This can be done because the value does not to be very accurate (average). Version 0.3.1 - 20150911 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305A ** Bugfix * Changed the function header of SWITCH_get_state ** Comments * Implemented functionality that the powermeter channel simulates a keypress on button one or two to trigger the profile if someone presses another switch in the bridge network. * Implemented features to just switch the relay on if the chennel is off and vise versa. * Implemented further init step of the CS5490 to change the sample count (not the sample rate!). Version 0.3.0 - 20150904 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305A ** Bugfix * ** Comments * Removed some parts to added some HmIP-FSM functionality. Version 0.1.10 - 20150903 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305A ** Bugfix * ** Comments * Did some code cleanup and commentation. * Added powerstatus mechanism that changes DO of CS5490 and stores the value to a module variable. Version 0.1.9 - 20150706 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305A ** Bugfix * ** Comments * Added files for powermeter functionality. Version 0.1.8 - 20150702 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305A ** Bugfix * ** Comments * Added delays to the tasks if they try to call the parameter module and get a BUSY. Version 0.1.7 - 20150630 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305A ** Bugfix * Correted some behavior with sending and receiving ACKs. * Corrected default behaviour of long keypress. ** Comments * Version 0.1.6 - 20150626 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305A ** Bugfix * Simplified parameter lists. ** Comments * Removed some of my own warnings. * Removed triggering of "NACK peer unknown" because this is handled in the STACK / HMOS. * Further process in multi channel functionality. * Added functionality to send NACKs and statusinfo frames with set ACK bit. Version 0.1.5 - 20150624 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305A ** Bugfix * Fixed some parameter issues. ** Comments * Version 0.1.4 - 20150623 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305A ** Bugfix * ** Comments * Added switch module. * First steps of multi channel functionality added. Version 0.1.3 - 20150618 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A * 1564305A ** Bugfix * ** Comments * Further implementing of the profile task. * Made some changes to the creation of the internal link. * Added dummy-functionality as output. Version 0.1.2 - 20150617 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A ** Bugfix * ** Comments * Implemented creation of internal link. * Added profile task. (not tested yet!) * Added application_dummy for missiong (SWITCH-) functions to make the profile task compile. Version 0.1.1 - 20150615 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A ** Bugfix * ** Comments * Changes in the LED callbacks due to changes in HMOS. * Renaming of the functions in the application key module. Version 0.1.0 - 20150611 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A ** Bugfix * Corrected DEVICE_INFO_OPERATION_MODES. ** Comments * Added Button-task. * Added creating and handling of config request frames. * Added creating and sending of unconditional switch command frames. * Added define for relay port / pin. Version 0.0.1 - 20150605 -------------------------------------------------------------- ** Related Hardware * 1424102A + 1434181A ** Bugfix * ** Comments * Initial commit with template as new start of the project. --- END OF FILE --- Version - -------------------------------------------------------------- ** Bugfix * - * - ** New Feature * - * - ** Modification * - * - ** Improvement * - * - ** Bugs * - * - ** Related Hardware * - ** Comments * *